K1300 Kipp indexing plungers with rotation lock and lean-in chamfer

Material:
Steel version:
indexing pin hardened: grade 5.8

Stainless steel version:
indexing pin hardened: threaded sleeve 1.4305, indexing pin 1.4305.

Mushroom knob black grey thermoplastic.

Version:
Steel version:
indexing pin hardened, ground and black oxidised.

Stainless steel version:
indexing pin hardened, ground and bright.

Note:
Indexing plungers are used where any change in locking position due to lateral forces should be prevented. The rotation lock ensures that the position of the pin in relation to the sleeve cannot be changed. The point angle enables the pin to retract automatically through a lateral force from one side. Loosening the screw as far as the marking on the plunger enables the point angle to be rotated in 60° increments.

Assembly:
The screw can be loosened using a hex. Key.

On request:
Special versions.

Accessory:
Spacer rings K0665

Drawing reference:
Form A: without locknut
Form B: with locknut

1) marking ring

Special features:

Order No.