K1097 Kipp indexing plungers short version, with thread lock

Material:
Steel version:
Indexing pin hardened:
Threaded sleeve and indexing pin steel.

Stainless steel version:
Indexing pin not hardened:
Threaded sleeve and indexing pin 1.4305.

Mushroom knob black grey thermoplastic.
Thread lock blue polyamide.

Version:
Steel version:
Indexing pin hardened, ground, black oxidised.

Stainless steel version:
Indexing pin not hardened, ground, bright.

Note:
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Form CP is recommended for applications where the plunger remains disengaged over a long period and the pin should be prevented from springing back.
The thread lock enables the plunger to be screwed in to the exact depth required, no spacer ring is required.
The thread lock is a gripping polyamide coating that is applied punctiform (spot).

On request:
Special versions.

Accessory:
Spacer rings K0665

Special features:

Order No. K1097.95903 K1097.95004 K1097.95105 K1097.95206 K1097.95308 K1097.95410 K1097.97903 K1097.97004 K1097.97105 K1097.97206 K1097.97308 K1097.97410 K1097.195903 K1097.195004 K1097.195105 K1097.195206 K1097.195308 K1097.195410 K1097.197903 K1097.197004 K1097.197105 K1097.197206 K1097.197308 K1097.197410